Touch Screen FPC Connector for iPhone 4S

The Touch Screen FPC Connector for iPhone 4S is the 30-pin female connector soldered onto the logic board into which the touch screen flex plugs: it is the connection point that carries the digitizer signals to the phone.

It needs replacing when the touch doesn't respond or works only in some areas even with a new display, when the flex no longer clicks in firmly, or when the connector has bent, broken or corroded pins, often due to forcing the plug during a display replacement or to liquid damage.

Main features

• Type: touch screen FPC connector, logic board side.
• Pins: 30.
• Fitting: to be soldered onto the logic board (micro-soldering).
• Quality: compatible spare part, not original Apple.
• Quality control: QC Passed, tested before shipping.

iPhone 4S touch connector replacement

If even a new display doesn't respond to touch, the fault is often on the board: the touch FPC connector for iPhone 4S restores the connection and full touch operation.

Touch logic board connector spare part for iPhone 4S

A part designed for workshops equipped for micro-soldering, with a hot air station, microscope and suitable flux. Discover all the details of this spare part.

Compatibility

Apple iPhone 4S, models A1387 and A1431, in all storage sizes (8, 16, 32 and 64 GB). Not compatible with iPhone 4 (A1332, A1349) or with iPhone 5 and later models.

Package contents

• 1 x Touch Screen FPC Connector for iPhone 4S.

Installation note

A job for technicians experienced in micro-soldering: shield nearby components, remove the old connector with temperature-controlled hot air, clean the pads with desoldering braid and check under the microscope for bridges between pins before connecting the display. Check the exact model of your iPhone before fitting.

Certifications and warranty

Every spare part passes quality control (QC Passed) and is covered by the legal warranty provided for by D.Lgs. 206/05.

Replacement under warranty is only possible if the spare part was tested before final installation, has no soldered or glued parts and is returned complete with its original protective films and adhesives.

Images are representative and may differ slightly from the product shipped.

Official documentation

If you are unsure about your iPhone model, you can check the official Apple website.

For detailed information on warranty, withdrawal and purchase conditions, see the Terms of sale.

Note: the trademarks mentioned belong to their respective owners and are used only to identify the compatibility of the spare part. There is no affiliation with Apple Inc.