Touch Screen Separator LCD Machine Glue Disassembly for iPhone / Samsung / HTC / Sony etc.

Features:

1) Simply place the LCD display on the heating panel, turn on the "Vacuum Pump" switch, then you can separate the glass. And the LCD screen is securely fixed on the panel during separation.

2) The vacuum LCD separator shell is made of metal. And it is better than the vacuum backlight LCD separator.

3) The Vacuum LCD separator is equipped with four bearings. It is more convenient when separating;

4) The surface of the heating plate is very smooth. It securely holds the broken LCD display;

5) The LCD separator is equipped with non-slip mounting seats. Makes your work smooth and reduces the chance of damaging the LCD assembly.

6) This set of machines can help separate the phone's touch screen from the LCD display or the touch screen from the front glass lens.

Technical specifications:

1) Operating Voltage: 110v-240v

2) Separated front LCD screen

3) Automatic machine for hot plate separator

4) Low noise, cost-effective, and practical

5) Fast, high efficiency, and easy to use

6) LCD separator machine with vacuum pump inside for iPhone, Samsung, HTC, LG, glass repair

7) This machine comes with a built-in vacuum pump to suck the LCD display to the heating plate so you don't have trouble clamping the LCD screen. This is the latest model suitable for any side of the phone LCD

8) Works with:

All iPhone models

Samsung Galaxy 

Samsung Galaxy Note 

Samsung Galaxy Mega

HTC Phone

LG phone LCD

Not suitable for Curved screens

Nokia and some other cell phones

Brief introduction:

1) Simply place the LCD display on the heating panel, turn on the "Vacuum Pump" switch, then you can separate the glass. And the LCD screen is securely fixed on the panel during separation.

2) The LCD screen separator is used to separate the glass lens, touch screen, and LCD display assembly for Apple, Samsung, HTC, and other cell phones.

If you need molds or other accessories for iPhone, Samsung Galaxy. Please contact me before placing the order.

As current cell phones trend, Apple, Samsung, and HTC, many new cell phones are made of screen assemblies. - Because the glass lens, touch screen, and LCD are connected, it is difficult to manually separate the broken or cracked screen if that happens. You always have to take it to the repair shop. The cost is high and the time is long. Or you need to purchase an expensive equipment package, including separate machines, SMT machines, laminators, and bubble removal machines.

- But now you can easily manage it. We have developed the machine and the skills, there is no need to buy expensive equipment and large spaces for general repair shops. After learning the skills, you can replace an old screen within 30 minutes and it will look like new.

Package contents:

1 LCD separator for vacuum

1 x Cutting Line

1 x Power Cable

Instructions:

Temperature adjustment: (recommended exercises three times a bad separation of the apple screen (100 degrees) is set at 100 degrees, heating, press the screen upwards, press the screen also you will feel the pressure of the warm hand can be separated (--- in addition to plastic - on glue - polymerization) repeated three times, and then make a good screen.

1) Divided:

The key point 1 of the principle on the screen (quick below). 2 Cut the wire to make the lower shelf, below the screen level, - when the drop-down menu Don't worry, slowly about (size) to a large one, pull down until separation (one not) can return the knife two or three times, until you feel separated, then lift the line. The video is watching these key points within the action: don't worry when the dropdown is a steel wire to connect the cylinder near the dropdown cursor, not large radiant, then pull to a large extent.

2) In addition to plastic:

Support the glue solution is a special dedicated one, after the separation of the adhesive glue solution slowly with a clean cloth to clean.

3) The goose glue:

Due to the impact on the finished effect of the plastic screen, so to practice more, the amount of words cannot be clearly said. As long as they go full screen on the line. Skills, (to avoid bubbles there, when we have to slowly put the glass, watch the glue, don't let it have a bubble, don't put hand pressure, and let it sink slowly. wait for the glue itself to go all over the screen.)

4) Care

 Key point of the polymerization process: screen good according to the polymerization lamp for 1-2 minutes, then extract (this process is called pre-cured), clean side of glue, and then put the photopolymerization, generally polymerizing 8 - 15 minutes.

Includes everything in the photo