MagSafe DC-in Board for MacBook 13" A1342

The MagSafe DC-in Board for MacBook 13" A1342 is the small board the MagSafe charger snaps onto on the white Unibody MacBook: it carries power from the adapter to the logic board. It is the part to fit when the MacBook won't charge, the connector LED stays off or charging keeps cutting in and out.

Main features

• Part number (APN): 922-9176.
• Code printed on the board: 820-2627-01 / 820-2627-A.
• Condition: removed from a used device, tested.

MagSafe Board for MacBook A1342

The DC-in board sits on the left side of the MacBook, right where the MagSafe connector plugs in, and is connected to the logic board. With use the port can wear out: the charger doesn't latch properly, the LED flickers or goes off when you move the cable. Before ordering, check the part numbers on the page of the MagSafe board for MacBook A1342.

Replacement DC-in Board for MacBook 13" Unibody

It is the right fix when the MacBook won't charge or charges intermittently and the power adapter works fine on another Mac. Replacing just the DC-in board means the logic board doesn't need to be touched. Discover all the details of this part.

Compatibility

• MacBook 13" Unibody A1342, Late 2009 (MC207).
• MacBook 13" Unibody A1342, Mid 2010 (MC516).

Package contents

• 1 x MagSafe DC-in Board for MacBook A1342.

Installation note

No soldering is needed: it is a separate board that is screwed to the case and connects to the logic board through its connector. Disconnect the battery before opening the MacBook and test the power adapter on another Mac first: if the charger is the problem, replacing the board won't help. If you have no experience, have the job done by a technician.

Official documentation

If you are not sure which model you have, you can check it on the official page Apple: Identify your MacBook model.

For detailed information on warranty, returns and purchase conditions, please read our Sales Terms.

Note: the trademarks mentioned belong to their respective owners and are used only to identify the compatibility of the part. There is no affiliation with Apple Inc.