Micro Spy Camera

Product Description

Features: video and audio recording, motion detection, photo capture

Easy to use

Memory: Micro SD / TF, max 32GB (not included)

Instructions

1. Insert a TF card

2. Start the camera: Turn on the camera's power switch, long press button A on the remote control until the red and blue lights flash at the same time; After vibrating once, the blue and red lights continue, indicating that the camera is in standby mode

3. Record video: in standby mode, short press button B, the red light flashes 3 times and turns off, indicating that the camera is recording a video, then press button B once again, after vibrating three times and the red light on, indicating that a video is saved.4. Take a photo: in standby mode, press button C once, the blue light flashes once, indicating that a photo has been taken

4. Motion detection: Press button D once, the red light flashes 4 times then goes off, indicating that the camera enters motion detection and is recording a video. Press button D once again, the red and blue lights on, indicating that a video is saved. In motion detection mode, the camera will record a video and save it every five minutes until the memory card is full or the power battery runs out.

5. Turn off the camera: long press button A, vibrate once, red and blue lights flash 3 times at the same time then turn off, indicating that the camera has been turned off

6. Charging: Connect the camera to the external battery, then connect it to the PC via the USB cable, the blue light will remain on and the red light will flash slowly, indicating that the camera is charging

Technical Specifications

Resolution 1920 x 1080, 720p

Viewing angle 90 degrees

Power dissipation 220mA / H

Memory support Micro SD Card (TF card)

Rechargeable lithium battery type

Battery capacity 380mAh

30fps Frame Rate

Purchase Contents

1 x USB Cable

1 x User Manual

1 x Remote Control

1 x Camera Circuit

1 x Battery Pack